Construction Grouts

Approx. Rs 30 / KgGet Latest Price

Product BrochureProduct Details:

GeoTek HS is based on a polyol component (part A) and a polymeric MDI (part B). When mixed, a hydrophobic polyurethane foam is formed which is tough, rigid and resistant to a wide range of chemicals. Controlled expansion and high early strength allows this material to be used effectively for raising sunken slabs and pavements. GeoTek HS is also used widely for underpinning applications where increased soil bearing characteristics are required

Approx. Rs 605 / BagGet Latest Price

Product BrochureProduct Details:

Backed by a team of knowledgeable professionals, we are an identified firm in the market for providing an extensive range of Ultratech Power Construction Grouts.

Approx. Rs 600 / PackGet Latest Price

Product BrochureProduct Details:

Ultratech Power Grout NS1 is a cement based non-shrink, non-expanding polymer enriched high performance, high strength, high quality binder for precision grouting applications. POWERGROUT-NS1 is developed by using special polymers, additives and selected fillers.  

 

 

Approx. Rs 600 / PackGet Latest Price

Product BrochureProduct Details:

UltraTech POWERGROUT-NS2 is a cement based non-expanding polymer enriched high performance, high early strength, high quality binder for precision grouting applications. POWERGROUT-NS2 is developed by using special polymers, additives and selected fillers. Addition of well graded coarse aggregates of up to 20mm down size is possible for higher volume applications.  

Approx. Rs 500 / KgGet Latest Price

Product BrochureProduct Details:

TamPur 125 is based on a polyol component (part A) and a polymeric MDI (part B). When mixed, a hydrophobic polyurethane foam is formed which is tough, rigid and resistant to a wide range of chemicals. TamPur 125 reacts rapidly enabling the product to cut off large water leaks.


Features:

• High foam strength
• Rapid reaction
• Good bond strength
• Medium viscosity
• Solvent free environmentally safe

Product Price :Get Latest Price

Product BrochureProduct Details:

TamSeal EP10 IN is a two-component, 100% solids fastcuring hybrid polyurea system designed especially for its waterproofing and corrosion resistance characteristics. The exceptional physical properties of this polyurea system provide outstanding water resistance. The high tensile strength and elongation provides protection from mechanical damage and resistance to puncture and tear. It may be sprayed to a thickness of greater than 1 mm per coat and cures to become water-insensitive within minutes.

Approx. Rs 17 / KgGet Latest Price

Product BrochureProduct Details:

Uses Conbextra GP2 is used for precision grouting where it is essential to withstand static and dynamic loads. Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc., It can also be used for anchoring a wide range of fixings. These include masts, anchor bolts and fence posts. Advantages „ Gaseous expansion system compensates for shrinkage and settlement in the plastic state „ No metallic iron content to cause staining „ Pre-packed material overcomes onsite batching variations „ Develops high early strength without the use of chlorides „ High ultimate strength ensure the durability of the hardened grout „ Free flow ensures high level of contact with load bearing area Description Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100mm. Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout. Technical support An experienced technical advisory team is available to give technical service on request.

Approx. Rs 63 / PackGet Latest Price

Product Details:

Cebex 100 is supplied as a powder admixture. The material is a combination of a plasticising agent and a gas producing expansion medium. The plasticising agent allows the use of a reduced water/cement ratio with consequent increased strengths and durability. The expansive medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion. Sufficient restrained expansion is developed to ensure a high degree of interfacial contact.