Bonding Agent

Approx. Rs 1,000 / KgGet Latest Price

Product BrochureProduct Details:

CICO��Polygrout��is a low viscosity liquid which reacts with water in a controlled manner to form a swelling, resilient adhesive solid in densities and strength appropriate to the designated task. When injected under pressure into leaking structures, through the process of polymerization, a permanent flexible water barrier is formed.The liquid retains its initial low viscosity upon contacting water allowing it to flow without dilution. Once the CICO POLYGROUT water reaction commences, the grout expands penetrating into its surrounding and quickly cures to a tough, adhesive solid to repel the influence of underground seepage flow and solidify the objective ground which is unaffected by corrosive environments.

Approx. Rs 496 / BagGet Latest Price

Product Details:

Plastic shrinkage compensated , high flow , high strength cementitious grout with low exothermic heat . 

Approx. Rs 50 / KgGet Latest Price

Product Details:

Auramix 200 is a high performance retarding super plasticizers intended for applications where retardation and long workabilty retention are required 

Approx. Rs 165 / LitreGet Latest Price

Product BrochureProduct Details:

Uses For modifying and improving bonding of fl oor toppings, renderings and mortars; repair of worn, damaged and spalled concrete, repair of large cracks; polymer modifi ed fl oor screeds; waterproof plasters for masonary and slurries. Advantages  Simple to use - Single component, gauged as required. High - Provides excellent bond to concrete, adhesion plaster, masonry, stone work, etc. Improves -Gives weather resistant mortar with improved durability impermeability to chlorides and other harmful agents.  Reduces - Provides waterproof screeds, plasters and Permeability slurries. Increases - Improved tensile and fl exural properties strength allow thin applications.  Versatile - Compatible with all common hydraulic cements.  Cost eff ective - Nitobond SBR (Latex) is economical to use Description Nitobond SBR(Latex) is modifi ed styrene butadiene emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too. Technical Support Fosroc provides a technical advisory service supported by a team of specialists in the fi eld. Properties Typical mechanical properties of 1 : 3 cement sand mortar at W/C - 0.45 for control and W/C - 0.35 for mortar containing Nitobond SBR (Latex) ( 5 lites / 50 kg cement ). Tested in accordance with BS 6319 & wet cured. Specifi c Gravity 1.015 to 1.040 @ 27OC Mechanical properties Control Nitobond SBR (Latex) Compressive strength (N/mm2 ) 3 days 11.5 12.5 7 days 13.0 14.5 28 days 22.0 24.0 Tensile strength (N/mm2) @ 28 days 2.5 3.5 Flexural strength (N/mm2) @ 28 days 5.0 6.5

Approx. Rs 2,800 / BucketGet Latest Price

Product Details:

Dekguard primer WB is an acrylic based primer which is supplied as a white liquid and is based on special type of water based acrylic polymer that enables it to be applied over alkaline surfaces such as plaster, concrete and masonry.

Product Price :Get Latest Price

Product BrochureProduct Details:

Nitobond AR is a modified acrylic emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications. Nitobond AR is the recommended primer for the Fosroc cementitious repair system.

Approx. Rs 220 / KgGet Latest Price

Product Details:

HACK AID PLAST is a unique single pack polymeric solution that strengthens the bond between plaster and new and old concrete greatly. USES 1. Bond between concrete and plaster 2. Bond between concrete and ceramic /glaze tile ADVANTAGES 1. HACK AID PLAST holds the concrete tightly due to interaction polymerisation. 2. As the concrete cures, the bond strength. Non-ionic, no possibility of attack on concrete by chlorides, alkalis, sulphates, etc. 4. It does not have any corroding or deteriorating effect on the reinforcement steel. 5. The bond between steel and concrete is also preserved by HACK AID PLAST. . 6. Laboratory tests reveal that the force required to pull out HACK AID PLAST aided plaster is twice the force required to detach ordinary plaster. (Hack-AidPlast not used) 7. In general, in many repair cases gunniting does not last due to inadequate bond. This may be easily remedied by HACK AID PLAST. Use of HACK AID PLAST as a bonding layer

Product Price :Get Latest Price

Product BrochureProduct Details: