Joint Sealants

Approx. Rs 1,875 / PieceGet Latest Price

Product BrochureProduct Details:

DescriptionPenebar™ Sw-45 Rapid Is A Unique Bentonite InfusedButyl Rubber Sealing Compound Designed To ExpandRapidly When Exposed To Moisture, Making It A Self-healing Joint Material For Construction Joint Applications.ApplicationsBuilding FoundationsSlabsRetaining WallsStorage TanksOther Similar Non-moving Cold Construction JointsPhysical PropertiesColor: BlackSpecific Gravity (Astm D71): 1.55 ± 0.05Volatile Matter (Astm D6): 1% MaximumPenetration, 150 G Cone @ 25°c (77°f); 5 Sec (AstmD217): 40 ± 5 MmApplication Temperature Range: -23°c To 38°c(-9°f To 100°f)Service Temperature Range: -34°c To 82°c(-29°f To 180°f)StandardComplies And Meets The Requirements To Eu ReachRegulation (Ec) No 1907/2006 Article 33(1) Obligation ToProvide Information Of Safe Use (See Reach Requirement InReport For Details).Directions For UseHow To Apply Penebar™ Sw-45 Rapid OnPoured-in-place Construction Joints:1) Apply Penebar™ Primer By Using Brush At A MinimumOf 0.1 Mm (4 Mils) Thick By 50 Mm (2”) Wide Over The EntireSurface Length To Receive Penebar™ Sw-45 Rapid. Allow ItTo Dry For 10-15 Minutes At A Temperature Of 25°c (77°f) Or,Where The Temperatures Are Low, Allow It To Dry For ALonger Time.2) By Using The Heel Of The Hand And Moderate Pressure,Press A Bead Of Penebar™ Sw-45 Rapid Firmly IntoPosition On The Standing Structure. Make Sure The ProductHas Bonded With The Primed Area.3) Where Required, Splice Ends To Form A Continuous,Uninterrupted Seal. For Best Results, Cut Each End AtOpposite 45° Angles And Tightly Butt Ends Together. Do NotOverlap Ends. Gently Knead The Spliced Ends Creating AnUninterrupted Seal.4) Peel The Protective Covering From The Exposed Side OfThe Installed Penebar™ Sw-45 Rapid.5) Follow Standard Concrete Placing Procedures From HereOnwards.